Tektronix WCA230A, Programmer'S Manual, Page: 347 / 678

:MMEMory Commands
WCA230A & WCA280A Programmer Manual
2- 321
:MMEMory:STORe:PULSe (No Query Form)
Stores the pulse measurement results in the specified file.
:MMEMory:STORe:PULSe <file_name>
<file_name>::=<string>
specifies the file to store the pulse measurement
results. The file extension is .csv.
TIMPULSE
:MMEMory:STORe:PULSe "C:\My Documents\Result1.csv"
stores the pulse measurement results in the Result1.csv file in the My Documents
folder.
:MMEMory:STORe:STABle (No Query Form)
Stores the symbol table in the specified file.
:MMEMory:STORe:STABle <file_name>
<file_name>::=<string>
specifies the file in which to store.
The file is in text format, and its extension is .sym.
The following are written in the header before the data:
1. Date and time
2..Modulation
3. Symbol rate
4. Measurement filter
5. Reference filter
6. Filter factor (
α
)
7. Time from the data end point of the first symbol
NOTE
. The date and time saved to the .sym file is the date and time of the last
analysis of the symbol table measurement. If the analysis was run on a loaded
signal file (filename.iqt), then the date and time in the .sym file will match the
loaded .iqt file.
Syntax
Arguments
Measurement Modes
Examples
Syntax
Arguments