Tektronix WCA230A, Programmer'S Manual

Page: 50 / 678

Command Groups
2- 24
WCA230A & WCA280A Programmer Manual
Table 2- 14: :DISPlay commands (Cont.)
Header Description
:DISPlay:WAVeform:Y[:SCALe]:FIT Runs auto-scale.
:DISPlay:WAVeform:Y[:SCALe]:FULL Sets the vertical axis to the default full-scale.
:DISPlay:WAVeform:Y[:SCALe]:OFFSet(?) Sets the minimum vertical, or amplitude, value (bottom end).
:DISPlay:WAVeform:Y[:SCALe]:PDIVision(?) Sets the vertical, or amplitude, scale.
:FETCh Commands
The :FETCh commands retrieve the measurements from the data taken by the
latest INITiate command.
If you want to perform a FETCh operation on fresh data, use the :READ
commands, which acquire a new input signal and fetch the measurement results
from that data.
Table 2- 15: :FETCh commands
Header Description
:FETCh:ADEMod:AM? Returns the AM signal analysis results in time series.
:FETCh:ADEMod:AM:RESult? Returns the AM signal analysis results.
:FETCh:ADEMod:FM? Returns the FM signal analysis results in time series.
:FETCh:ADEMod:FM:RESult? Returns the FM signal analysis results.
:FETCh:ADEMod:PM? Returns the PM signal analysis results in time series.
:FETCh:ADEMod:PSPectrum? Returns the spectrum data of the pulse spectrum measurement.
:FETCh:CCDF? Returns the CCDF measurement results.
:FETCh:DDEMod? Returns the digital modulation analysis measurement results.
:FETCh:DISTribution:CCDF? Returns the CCDF trace data.
:FETCh:OVIew? Returns the maximum and minimum of waveform on the overview.
:FETCh:PULSe? Returns the result of the pulse characteristics analysis.
:FETCh:PULSe:SPECtrum? Returns the spectrum data of the frequency domain measurement.
:FETCh:PULSe:TAMPlitude? Returns the time domain amplitude data.
:FETCh:PULSe:TFRequency? Returns the frequency deviation measurement results.
:FETCh:RFID? Returns the measurement result of the RFID analysis.
:FETCh:RFID:ACPower? Returns the results of the ACPR measurement.
:FETCh:RFID:SPURious? Returns the results of the spurious signal measurement.
:FETCh:RFID:SPECtrum:ACPower? Returns spectrum waveform data of the ACPR measurement.
:FETCh:RFID:SPECtrum:SPURious? Returns spectrum waveform data of the spurious measurement.