Tektronix WCA230A, Programmer'S Manual

Page: 573 / 678

WCA230A & WCA280A Programmer Manual
2- 547
:TRACe Commands
The :TRACe commands set up display of Trace 1 and 2.
NOTE . The :TRACe commands are available in the S/A (spectrum analysis) mode
except real-time. To use a command in this group, you must have selected a S/A
mode (except SARTIME and SAZRTIME) using the :INSTrument [:SELect]
command.
Command Tree
Header Parameter
:TRACe<x> | :DATA<x>
:AVERage
:CLEar
:COUNt
<numeric_value>
:DDETector MAXimum | MINimum | PTPeak
:MODE NORMal | AVERage | MAXHold | MINHold | FREeze
| OFF
:TRACe2 | :DATA2
:MODE MAXMinimum | REFerence | OFF
Where
TRACe<x>::={ TRACe[1] | TRACe2 }
or
DATA<x>::={ DATA[1] | DATA2 }
TRACe[1]
or
DATA[1]
indicates that this setup is made for Trace 1.
TRACe2
or
DATA2
indicates that this setup is made for Trace 2.