Tektronix WCA230A, Programmer'S Manual, Page: 37 / 678

WCA230A & WCA280A Programmer Manual
2- 11
Command Groups
This section lists the WCA200A Series analyzer commands in two ways. It first
presents them by functional groups. It then lists them alphabetically. The
functional group list starts below. The alphabetical list provides more detail on
each command and starts on page 2--39.
The WCA200A Series analyzers conform to the Standard Commands for
Programmable Instruments (SCPI) 1999.0 and IEEE Std 488.2-1987 except
where noted.
Items followed by question marks are queries; items without question marks are
commands. Some items in this section have a question mark in parentheses (?) in
the command header section; this indicates that the item can be both a command
and a query.
For the conventions of notation in this manual, refer to Command Syntax on
page 2-1 and following pages.