Tektronix WCA230A, Programmer'S Manual

Page: 663 / 678

Appendix D: Setting Range
WCA230A & WCA280A Programmer Manual
D- 3
Table D- 3: Display format and scale: Signal source analysis
Measurement item Display format Horizontal range Vertical range
Phase noise Spectrum (Center frequency)
±
(Span)/2 --200 to +100 dBm
C/N vs. Offset frequency 10 Hz to 100 MHz --310 to +140 dBc/Hz
Spurious Spurious (Center frequency)
±
(Span)/2 --200 to +100 dBm
Real-time phase noise Spectrogram Refer to Table D--1.
Power vs. Time
Spectrum
Same as that in Phase noise.
Noisogram 10 Hz to 100 MHz Vertical: 40 to 40960 frames
Color: --230 to 70 dBc/Hz
Equiv. jitter vs. Time --(Acquisition length) to 0 s 0 to 0.1 s
RMS noise vs. Time --(Acquisition length) to 0 s 0 to 359 degrees / 0 to 6.28 radians
C/N vs. Time 0 to (Analysis length) s --310 to +140 dBc/Hz
C/N vs. Offset frequency Same as that in Phase noise.
Real--time spurious Spectrogram Refer to Table D--1.
Power vs. Time
Spectrum
Same as that in Phase noise.
Noisogram 10 Hz to 100 MHz Vertical: 40 to 40960 frames
Color: --230 to 70 dBc/Hz
C/N vs. Offset frequency Same as that in Phase noise.
Spurious
Same as that in Spurious above.
Frequency vs. Time Spectrogram Refer to Table D--1.
Power vs. Time
Spectrum
Same as that in Phase noise.
Frequency vs. Time Refer to Table D--1.