Getting Started
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
1- 21
Setting Up RS-232 Remote Communications
All TDS3000, TDS3000B, and TDS3000C Series communication modules have
a 9-pin D-type shell RS-232 connector, as shown in Figure 1--4 on page 1--5.
The RS-232 interface provides a point-to-point connection between the
oscilloscope and equipment such as a computer or terminal. This section tells
how to connect and set up the oscilloscope for communication over the RS-232
interface.
The RS-232 standard defines two device types: Data Terminal Equipment (DTE)
and Data Communications Equipment (DCE). The TDS3000B and TDS3000C
series is a DTE device. In standard usage, DTE devices have a male connector,
and DCE devices have a female connector. You should use a straight-through
female-to-male cable of less than 50 feet for a local DTE-to-DCE connection.
Figure 1--14 shows the 9-pin connector with its pin number assignments.
1
No connection
2
Receive data (RxD)
(input)
3
Transmit data (TxD)
(output)
4
Data terminal ready (DTR)
(output)
5
Signal ground (GND)
6
Data set ready (DSR)
(input)
7
Request to send (RTS)
(output)
8
Clear to send (CTS)
(input)
9
No connection
1
2
3
4
5
6
7
8
9
Figure 1- 14: The RS-232 connector pin assignments
In terms of the connector and the way the oscilloscope uses the signal lines, the
oscilloscope behaves just like a PC/AT COM port. Table 1--4 lists cables you can
use to connect the oscilloscope to other devices.
Table 1- 4: RS-232 adapter cables
Tektronix part number
Cable type
Use
012-1379-00
9-pin female to 9-pin female,
null modem
PC/AT or laptop
012-1380-00
9-pin female to 25-pin female,
null modem
Old style PC with 25-pin con-
nector
012-1241-00
9-pin female to 25-pin male,
modem
Telephone modem
Connecting to an RS-232
Device
Summary of Contents for TDS3000 Series
