Command Descriptions
2- 252
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
REM (No Query Form)
Specifies a comment. This line is ignored by the instrument.
Miscellaneous
REM <QString>
<QString>
is a string that can have a maximum of 255 characters.
REM ”This is a comment”
is ignored by the instrument.
*RST (No Query Form)
*RST returns the instrument settings to the factory defaults (see
Appendix D:
Factory Initialization Settings
).
The *RST command does not alter the following:
H
The state of the IEEE Std 488.1--1987 interface.
H
The selected IEEE Std 488.1--1987 address of the oscilloscope.
H
Calibration data that affect device specifications.
H
The Output Queue.
H
The Service Request Enable Register setting.
H
The Standard Event Status Enable Register setting.
H
The Power-on status clear flag setting.
H
Alias definitions.
H
Stored settings.
H
The *PUD? response.
Status and Error
FACtory, *PSC, *RCL, RECAll:SETUp, *SAV, SAVe:SETUp
*RST
Group
Syntax
Arguments
Examples
Group
Related Commands
Syntax
Summary of Contents for TDS3000 Series
