Command Descriptions
2- 300
TDS3000, TDS3000B, and TDS3000C Series Programmer Manual
TRIGGER:B:EDGE:SOURCE LINE
specifies the AC line voltage as the B edge trigger source.
TRIGGER:B:EDGE:SOURCE?
might return
CH2
for the B edge trigger source.
TRIGger:B:EVENTS? (Query Only)
Returns the current delayed trigger event parameter.
Trigger
TRIGger:B:EVENTS? <NR1>
TRIGGER:B:EVENTS?
might return 14 indicating the B trigger occurs on the 14th occurance of a
B trigger event, after the A trigger occurs.
TRIGger:B:EVENTS:COUNt
Sets and returns the number of B trigger events that must occur before the
B trigger occurs when TRIGger:DELay:BY is set to EVENTS.
Trigger
TRIGger:B:EVENTS:COUNt <NR1>
TRIGGER:B:EVENTS:COUNT 4
specifies that the B trigger will occur on the fourth B trigger event.
Examples
Group
Syntax
Examples
Group
Syntax
Examples
Summary of Contents for TDS3000 Series
