Tektronix DSA8200 Series, Service Manual

Page: 66 / 196

Removal and Installation Procedures
4--8
DSA8200 Digital Serial Analyzer and Modules Service Manual
Equipment Required.
Most modules in this instrument can be removed with a
screwdriver handle mounted with a size T-15, Torx
9
screwdriver tip.
Use this
tool whenever a procedure step instructs you to remove or install a screw unless
a different size screwdriver is specified in that step.
All equipment required to
remove and reinstall each module is listed in the first step of its procedure.
Table 4--3: Tools required for module removal
Item
No.
Name Description Part number
1 Screwdriver handle
Accepts Torx
9
-driver bits
General Tool:
620-440
2 Screwdriver handle, ex-
tended length, 10.5 to
12 inches
Accepts Torx
9
-driver bits and
3
/
16
socket tip. Used for removing the
T-10 screws and
3
/
16
inch hex posts
from the electrical and optical module
slots.
Standard tool or
Xcelite 99X10V
N/S#48706
3 T-10 Torx tip Used for removing the electrical or
optical module chassis. Torx
9
-driver
bit for T-10 size screw heads.
General Tool:
640-235
4 T-15 Torx tip Used for removing most the instru-
ment’s screws. Torx
9
-driver bit for
T-15 size screw heads.
General Tool:
640-247
5 T-20 Torx tip Used for removing the handle
hardware. Torx
9
-driver bit for T-20
size screw heads.
General Tool:
640-250
6
3
/
16
inch socket tip Used for removing the
3
/
16
inch hex
posts from the electrical and optical
module slots.
Standard tool
7
1
/
8
inch flat-bladed screw-
driver
Screwdriver for unlocking cable
connectors.
Standard tool
8 #0 phillips screwdriver Screwdriver for removing small
phillips screws, CD & hard drive.
Standard tool
9 Angle-Tip Tweezers Used to remove front panel knobs Standard tool
10
3
/
16
inch open-end wrench Used to remove the rear panel nut
posts.
Standard tool
11
5
/
16
inch open-end wrench Used to remove the rear panel nut
posts.
Standard tool
12 Coaxial cable connector
tool
Used to remove coaxial connectors
from d-subminiature connector
housings.
Amp: 58095-1