Tektronix DSA8200 Series, Service Manual

Page: 29 / 196

Installation
DSA8200 Digital Serial Analyzer and Modules Service Manual
1- 5
Power On the Instrument
Follow these steps to power on the instrument for the first time.
1. Check that the line fuses are correct for your application. Both fuses must be
the same rating and type. Fuse types require a unique cap and fuseholder. See
Table 1--2 and Figure 1--3.
Table 1- 2: Line fuses
Fuse type Rating Fuse part number
Cap & fuseholder
part number
0.25 x 1.250 inch 8 A, fast blow, 250 V 159-0046-00 200-2264-00
5 x 20 mm 6.3 A, fast blow, 250 V 159-0381-00 200-2265-00
Fuses AC power Power switch
Figure 1- 3: Line fuse and power cord connector locations, rear panel
CAUTION.
Connect accessories (such as a PS2 keyboard and mouse, and other
accessories) before applying power to the product. Some accessories can be
damaged if connecting or disconnecting with the instrument power on.
USB devices can be plugged or unplugged without first turning power off.
2.
Connect the keyboard and mouse, observing the caution above.
NOTE
. Connection of the keyboard and mouse is optional. You can operate most
features without them, using the front-panel controls and the touchscreen.
3.
Connect the power cord.
4. Turn the Power switch on at the rear panel. (See Figure 1--3 on page 1--5 for
switch location.)
5. Push the On/Standby switch to power on the instrument (see Figure 1--4 for
the switch location).