Tektronix DSA8200 Series, Service Manual

Page: 32 / 196

Installation
1- 8
DSA8200 Digital Serial Analyzer and Modules Service Manual
SN B019999 and Below.
Use the Windows Operating System restore CD(s) that
came with your instrument. Follow the installation procedures provided with the
CD(s). The procedures vary based on the instrument and the version of Microsoft
Windows being installed.
SN B020000 and Above.
Use the procedure found in the DSA8200 Quick Start
User Manual. Operating System restore disks are not shipped with these
products.
If you cannot reboot from the instrument hard drive, you must rebuild the
instrument hard drive. This process will return the hard disk to the its original
condition present when the instrument shipped.
Data and programs you may have installed will be lost when rebuilding the hard
drive.
If you must rebuild the system hard drive, install the Microsoft Windows
operating system and then reinstall all applications.
In case of instrument problems, you may want to run the system diagnostics. If
needed, you can see the procedure in the
DSA8200 Specifications and Perfor-
mance Verification manual.
If the instrument is turned off before the operating system boots, or if you’ve
installed a third-party product with a driver incompatible with instrument start
up, Windows will open in Safe mode. The touchscreen will be inoperable;
therefore, you must install the standard-accessory mouse and keyboard to operate
the instrument.
When you have finished investigating and have removed any barrier to Windows
start-up, you can reboot. If the instrument no longer boots to Safe mode, you can
remove the keyboard and mouse if desired.
System Hard Drive
Rebuild
System Diagnostics
Windows Safe Mode