CTS850 SDH/PDH Test Set User Manual
3–159
Setting Jitter/Wander Parameters
This section gives examples of how to work with Jitter/Wander test
setups; Setting Jitter or Wander Generation; Setting Jitter Receive
Parameters; and, Calibrating Jitter Systems.
Refer also to the Telecommunications Technology section within
the Appendices (located on reference–on–CD) for theory of operation
information on Jitter & Wander.
CTS850 SDH/PDH Test Set
Jitter/Wander – Working with Test Setups
You can use the CTS850 to run the following types of jitter
conformance tests:
H
Jitter Tolerance
H
Jitter Transfer
H
Output Jitter
H
Pointer Jitter (SDH rates only)
In each of these tests, the CTS850 measures the jitter on a signal at
the output of a network element. For some tests, the CTS850
generates jitter to stimulate the network or a network element while
it simultaneously measures the network response.
Summary of Contents for CTS 850
