Tektronix CTS 850, User Manual

Page: 47 / 178

Getting Started
CTS850 SDH/PDH Test Set User Manual
1–13
4. Check that you have the proper electrical connections. The
CTS850 power requirements are listed in Table 1–3.
Table 1–3: Power Requirements
Voltage Range Frequency Range
90–132 V 50/60 Hz
180–250 V 50/60 Hz
100–132 V 400 Hz
5. Connect the proper power cord from the rear-panel power
connector (see Figure 1–4) to the power system.
Turning On the CTS850
To properly turn on the CTS850:
1. Press the front panel ON/STBY button (see figure 1–5).
The ON/STBY button controls power to all instrument circuits.
The CTS 850 performs an internal self–test each time it is turned
on. When turned on, it displays a screen that states whether or not
it passed the self–test. (If the self–test passes, the status display
screen is removed after a few seconds.)
2. Check the self–test results.
If the self–test fails, contact your local Tektronix Service Center
for assistance.