Tektronix CTS 850, User Manual

Page: 101 / 178

Tutorial
CTS850 SDH/PDH Test Set User Manual
2–51
Figure 2–32: The Display in Edit Mode
To change the value of any bit within the byte, highlight the bit you
wish to change. To change the value of the highlighted bit, select
either 1 or 0. After you assign a value to the highlighted bit, the
highlight moves to the next bit to be edited.
Edit the S1 byte to read 10101010.
Select DONE when you have finished editing the byte.
You can assign preset values to the highlighted byte. For example,
rather than editing each bit of the byte as you just did, you could also
have selected Set to 10101010. To see that the CTS850 is now
receiving the new value of the S1 byte:
Press Menu
Button Select Menu
Page Highlight
Parameter
Select Choice
RECEIVE SECTION
OVERHEAD none none