Tektronix CTS 850, User Manual

Page: 73 / 178

Functional Overview
CTS850 SDH/PDH Test Set User Manual
2–23
Select the text string to edit by
using the knob.
Select EDIT TEXT to
edit the specified
text string.
Figure 2–18: Selecting a Text String for Editing
Text strings (not file names) may contain both upper– and lower–
case characters. Moving the selected characters (with the knob on the
front panel) off the end of the selection string changes between
upper– and lower–case.
To edit a text string:
1. Select the text string by turning the knob until the desired text
string is highlighted (see Figure 2–18).
2. Select EDIT TEXT. This places the CTS850 into edit mode.
When in edit mode, the choices along the right side of the display
change (see Figure 2–19). In edit mode, the status line at the top
of the display is replaced with a line that displays the characters
available for placing into the text string. (Some characters
available for message text are not available for file names.)
3. To change the highlighted character or enter a new one, select the
character to enter by turning the knob.