Tektronix CTS 850, User Manual

Page: 136 / 178

Basic Test Procedures
3–30
CTS850 SDH/PDH Test Set User Manual
2. Set up the CTS850 as follows:
Press Menu
Button Select Menu
Page Highlight
Parameter
Select Choice
TRANSMIT JITTER &
WANDER Jitter Output MHz G.703
RECEIVE JITTER &
WANDER Jitter Input
Source Line
TEST SETUPS JITTER TESTS Test Type Jitter Transfer
Test Control Edit Setup
Mask Type as appropriate
Start Frequency as appropriate
End Frequency as appropriate
Number Freq
Samples as appropriate
3. Press the START/STOP button on the CTS850 so that the
START/STOP light is on.
As the test is running, the jitter transfer graph is displayed on the
screen. The test stops automatically after it has completed.