Tektronix CTS 850, User Manual

Page: 41 / 178

Getting Started
CTS850 SDH/PDH Test Set User Manual
1–7
First Time Operation
This section describes how to set up the CTS850 for the first time.
Installing the Accessory Pouch
The CTS850 ships with an accessory pouch that mounts on top of the
instrument. The pouch is not installed at the factory. To install the
accessory pouch:
1. Place the CTS850 on a table or work bench with the front facing
toward you.
2. Center the pouch plate and insert the rear edge of the plate in the
space between the cabinet top and the rear panel trim (see part A
of Figure 1–1).
3. Move the pouch sideways as necessary to line up the key slots in
the pouch plate with the keys on the rear panel (the plate is
centered when it is aligned) and push the plate all the way in (see
part B of Figure 1–1).
4. While keeping the pouch plate pushed under the rear panel trim,
reach under the pouch plate and carefully remove the backing
from the Velcro strip to expose the adhesive on the Velcro strip.
The Velcro should remain attached to the pouch plate.
5. Grasp the pouch plate assembly with both hands near the front of
the assembly.