TECO e510 series, Instruction Manual

Page: 68 / 197

4-10
Group 01- V/F Pattern selection & Setup
No. Description Range
Factory
Setting
Unit Note
01-00 Volts/Hz Patterns 1~18 0/9 -
01-01 V/F Max voltage
200V:170.0
～
264.0
400V:323.0
～
528.0
220.0/440.0 Vac
01-02
Max Frequency 0.20 ~ 650.00 50.00/60.00 Hz
01-03
Max Frequency Voltage Ratio 0.0 ~ 100.0 100.0 %
01-04 Mid Frequency 2 0.10 ~ 650.00 25.00/30.00 Hz
01-05 Mid Frequency Voltage Ratio 2 0.0 ~ 100.0 50.0 %
01-06 Mid Frequency 1 0.10 ~ 650.00 10.00/12.00 Hz
01-07 Mid Frequency Voltage Ratio 1 0.0 ~ 100.0 20.0 %
01-08 Min Frequency 0.10 ~ 650.00 0.50/0.60 Hz
01-09 Min Frequency Voltage Ratio 0.0 ~ 100.0 1.0 %
01-10
Volts/Hz Curve Modification
(Torque Boost)
0 ~ 10.0 0.0 % *1
01-11 V/F start Frequency 0.00~10.00 0.00 Hz
01-12
Slip compensation gain
0.05~10.00 0.10 ms
Group 02- Motor parameters
No. Description Range Factory
Setting
Unit Note
02-00
Motor No Load Current
---- Amps(AC) *4
02-01 Motor Rated Current (OL1) ---- A *4
02-02
Motor rated Slip Compensation 0.0 ~ 100.0
0.0 % *1
02-03
Motor rated speed
---- Rpm *4
02-04
Motor rated voltage
----
02-05
Motor rated power
----
02-06
Motor rated frequency
----
02-07
Motor pole number
2 ~16 4
02-08
~
02-13
Reserved
0: Disable
02-14 Auto Tune
1: Start Auto tune function.
0
02-15
Stator resistance gain
----
02-16
Rotor resistance gain
----