TECO e510 series, Instruction Manual

Page: 62 / 197

4-4
4.1.3 Digital display set up
On power up digital display screens will be as shown below.
2sec later
Power supply frequency
parameter
DSP/
FUN
DSP/
FUN
User selectable display formats:
12- 00 Display Mode
Range 0 0 0 0 0
High
Low
Each of the above 5 digits can be set to any of the selections below from 0 to 8
【 0 】 :Disable display 【 1 】 :output Current
【 2 】 :output Voltage 【 3 】 :DC voltage
【 4 】 :Temperature 【 5 】 :PID feedback
【 6 】 :AI1 【 7 】 :AI2 【 8 】 :count Value
The highest bit of 12-00 sets the power on the display, other bits set the selected display from range
0-7.as listed above.
Example1: Set parameter 12- 00=
【
10000
】
to obtain display format shown below.
2sec later
display
：
Power supply
Output Current
Set frequency
parameter
DSP/
FUN
DSP/
FUN
DSP/
FUN