TECO e510 series, Instruction Manual

Page: 91 / 197

4-33
02- Motor parameters
02- 00 Motor No Load Current
Range ----
02- 01 Motor Rated Current
Range ----
02- 02 Motor Rated Slip Compensation
Range 【
0.0 ~ 200.0
】
(%)
02- 03 Motor Rated Speed
Range ----
When the load causes the actual motor speed to be reduced below the speed set by inverter output frequency
(Slip) , parameter 02-02 Slip compensation can be used to correct the
speed.
Motor slip= Motor synchronization speed - Motor Rated Speed
Motor synchronization speed (Marked on the motor nameplate)
※
Note
：
02- 00/02- 01 differs with the inverter capacities(13- 00),It should be regulated according to actual
conditions.
02- 04 Motor Rated Voltage
Range
----
02- 05 Motor Rated Power
Range ----
02- 06 Motor Rated Frequency
Range ----
02- 07 Motor Pole Number
Range 【
2~ 16
】
02- 14 Auto Tune
Range
【
0
】
: Disable
【
1
】
: Enable
02- 15 Stator Resistance Gain
Range ----
02- 16 Rotor Resistance Gain
Range
----