manualshive.com logo in svg

Tecnoalarm TP8-96, Installer Manual, Page: 97 / 118

Share
Download
Tecnoalarm TP8-96 Installer Manual Download Page 97

TP8-96 VIDEO

 

- Installer Manual

Hardware configuration

7-5

7.2

HARDWARE CONFIGURATION WITHOUT  AUTOMATIC WIRING

If the automatic wiring option is disabled, disposition of the devices on the worktop is free. The devices can be
moved into in the desired position.
The connections between devices, i.e. power supply and RS485 serial lines, are not traced automatically. They can
be traced selecting the options “Draw power supply wiring” and “ Draw RS485 bus”.

CLICK ON VER. ICON

Viewing of the 

Options 

menu.

DISABLE THE OPTION AUTOMATIC WIRING

If necessary, disable the 

Automatic wiring

 item, then

click 

OK

 to exit.

CLICK ON THE HARDWARE CONFGURATION ICON

The hardware configuration menu is opened.

DROP-DOWN MENU

In addition to the functions Add and Delete, the menu
includes also the following options:

Move

Permits the moving of the devices on the worktop

Draw power supply wiring

Permits drawing of the red lines representing the power
supply

Draw RS485 bus

Permits drawing of the blue lines representing the
RS485 serial bus

Summary of Contents for TP8-96























































































































Reviews:

No comments