Tecnoalarm TP8-96, Installer Manual, Page: 67 / 118

TP8-96 VIDEO - Installer Manual Time parameter configuration
4-1
4. TIME PARAMETER CONFIGURATION
Select the Time parameter configuration tables of the control panel.
On the screen is viewed:
The Time parameter configuration tables permit to program the following parameters:
z
Time parameters
z
Timers
z
Access periods
z
Customization of the calendar (biennal)
4.1 TIME SETTINGS
SELECTION OF THE PROGRAM
The time settings configuration tables permit programming of
the time parameters of a specific program or all of the control
panel’s programs.
Select the program/s.
To program the time parameters, click on the name and
enter the required value.
z
Entry time 1 and 2 (mm:ss)
The entry time is the interval between the detection and
the release of the alarm.
Programming valid for delayed zones 1 and 2 only.
From 0 to 59 minutes and 59 seconds
z
Exit time (mm:ss)
The exit time is the interval between arming of the control
panel and the effective detection of active alarms.
Programming valid for delayed zones 1 and 2 only.
From 0 to 59 minutes and 59 seconds