Tecnoalarm TP8-96, Installer Manual, Page: 95 / 118

TP8-96 VIDEO - Installer Manual Hardware configuration
7-3
LIMITS OF THE SYSTEM
The program automatically controls the system’s
hardware limits, i.e. the maximum number of devices of
each type that may be configured (input expansions,
consoles, wireless devices, output expansions etc.)
When a device type reaches its limit, a warning window
automatically appears and the addition is prevented.
Click
OK to close the window.
ICON OF THE CONTROL PANEL
If wireless zones are programmed, they are displayed
on the icon of the control panel, which is in fact,
enlarged as the wireless module is attached directly to
the original icon.
CONFIGURATION OF THE SYSTEM
The devices viewed on the worktop correspond to the
system configuration.
Connections
The connections are represented as a unifilar diagram.
The red lines represent power supply and the blue ones
the RS485 serial line.
Siren bus
Since the schema represents only the RS485 serial line,
to simplify the graphic, the bus siren are connected to
RS485 serial line, too.
But on the real wiring, the bus siren must be connected
to the Siren bus.
Wireless devices
The wireless devices, except for the receiver modules,
are represented without any kind of connection.
Move the window
During the addition/deletion of devices, the hardware
configuration window may hide the system
configuration. To displace it, click on the blue bar.
DELETION OF A DEVICE
Select Delete to cancel a device from the system
configuration
Click on the device to be deleted
On the screen is viewed the image beside:
Commands available
z
Yes to confirm the deletion
z
No to undo the deletion