Tecnoalarm TP8-96, Installer Manual, Page: 80 / 118

Access configuration Installer Manual - TP8-96 VIDEO
5-4
5.2 PROGRAMMING OF THE KEYS
Select the Keys table.
On the screen is viewed:
The keys configuration table permits:
z
Programming of the name of the key/transponder/RFID card
z
Association of the functions
z
Association of the programs
z
Programming of the attributes of the keys/transponders/RFID cards
SELECTION OF THE KEY
Select the key and/or transponder and/or RFID card to be
programmed (1 to 100) from the drop-down menu.
PROGRAMMING OF THE KEY
For every key the following parameters can be programmed:
z
Name
Name or description of the device (max. 16 characters).
z
Type
Defines the function which must be executed by the key/
transponder/RFID card.
Select the function from the drop-down menu: arming/
disarming or by-pass.
PROGRAM
Association of the key/transponder/RFID card to the programs.
The key/transponder/RFID card is enabled to act only on the
associated programs (1 to 8).
To associate a program to the device, click on the
corresponding item.
The program number will be shown as a confirmation of the
association.
Warning: If you use the key reader with minikeypad
TP SK6N, for arming of the program, you will have to
insert the key into the key reader and enter the program
number.
In addition to the key-program association it is
indispensable to associate the programs to the key
reader, otherwise the introduction of the key will be
ineffective.