Tecnoalarm TP8-96, Installer Manual, Page: 33 / 118

TP8-96 VIDEO - Installer Manual Zone configuration
2-15
2.1.3 ZONE-PROGRAM ASSOCIATION
Select the Zone-Program table.
On the screen is viewed:
The Zone-Program configuration table permits the creation of max. 8 programs. The control panel can be armed through
one program at a time or several programs simultaneously. Every program groups a certain number of zones (1...96)
that are enabled/disabled contemporaneously on arming/disarming of the program (unless the program contains delayed
or common zones). If the program armed contains delayed zones, these are enabled for the detection of alarms only on
expiry of the exit time. If it contains common zones, these are enabled only if all the programs they are included in are
armed.
To associate the zones to the programs, select the program and then select the zones to be included in it by clicking
on the box beside the zone description. A program can contain max. 96 zones.
DESCRIPTION
Select the program by clicking on the program number in question and check all the zones you wish to include.
It is possible to associate an individual description to the program that will replace the zone number and identify the
program in every process. The program description will be viewed on the display and announced by the speaker of the
console.
z
A The voice message can be composed of max. 4 words selectable among those included in the vocabulary.
4 items are displayed, one for each word.
Click on the arrow of each item to scroll the vocabulary and select the word.
z
B At the end, click on the validation arrow B to memorize and play the message.
The words are copied into the description line. It is possible to program the description manually
writing it directly in the description line.
Remember that the display of the console views max. 16 digits. All further characters will be cut off.
Press:
z
OK to confirm and quit
z
Abandon to quit without saving
A
B