Tecnoalarm TP8-96, Installer Manual, Page: 42 / 118

Zone configuration Installer Manual - TP8-96 VIDEO
2-24
2.1.8 BUS SIRENS
Select the Bus siren table.
On the screen is viewed:
The bus siren configuration table permits the configuration of the sirens with RSC technology which can be connected
to the Siren Bus (1 to 8).
z
Program
Permits the association of the selected bus siren to the programs of the control panel (1 to 8).
z
After blinking
Defines the time of blinking once the alarm ring is off (max. 99 minutes).
z
Volume signaling/prealarm
Defines the volume of the signaling system status and prealarm (4 levels from low to high)
z
Siren mode
Selection of the functioning modes of the sirens
z
Alarm
The siren is activated when minimum one of the associated programs is in alarm (see time parameter configuration
table) and in case of general alarm (tamper, trouble etc.).
The volume is fixed whereas the sound type is programmable.
Select one of the available options:
•
Not active The siren is not activated
• Sounding Only the sounding is activated
• Flashing light Only the flashing light is activated
• Sflashing light The sounding and the flashing light are activated
z
Technical alarm
The siren is activated if the technical zone is completely excluded from the programs or if it is included in one of the
associated programs.
The volume is fixed whereas the sound type is programmable.
Select one of the available options:
•
Not active The siren is not activated
• Sounding Only the sounding is activated
• Flashing light Only the flashing light is activated
• Sflashing light The sounding and the flashing light are activated