Tecnoalarm TP8-96, Installer Manual, Page: 45 / 118

TP8-96 VIDEO - Installer Manual Telephone section configuration
3-1
3. TELEPHONE SECTION CONFIGURATION
Select the Telephone section configuration .
On the screen is viewed:
The configuration tables of the telephone section permit programming of the following parameters:
z
Telephone channels and general telephone parameters
z
GSM module (internal)
z
External GSM telephone communicator
z
Ethernet switch
z
Report codes
z
Opening message-Vocabulary
z
Voice messages and activation time of the remote controls
3.1 TELEPHONE PARAMETER CONFIGURATION
3.1.1 TELEPHONE CHANNELS AND STANDARD TELEPHONE PARAMETERS
The control panel is able to transmit alarm signaling or other data using either digital protocols or pre-recorded vocal
messages (composed of words of the vocabulary).
It can transmit and receive alarm signaling using the digital Tecnoalarm protocol or the most frequently used digital
protocols.
Programming upload and download is possible using the Tecnoalarm protocol only.
The incorporated telephone interface provides 8 channels (A, B, C, D, E, F, G, H) individually programmable with a
description, a principal and a reserve telephone number, the transmission protocol and the ID code. Furthermore, it is
possible to determine the channels to be blocked on reception of the corresponding command, i.e. vocal, digital
Tecnoalarm, all, singularly or simultaneously.
The principal telephone number is always called first and the reserve one is only called in case there is no answer or if
the line is busy.
The user can block the telephone channels by clicking on the
*
key of the telephone.
It is possible to define which channels are affected by the block.