Tecnoalarm TP8-96, Installer Manual, Page: 7 / 118

TP8-96 VIDEO - Installer manual Introduction to the TP8-96 VIDEO system
1-1
1.1 PROGRAMMING MENU
Description of the programming menus.
z
Advanced : Enabling or disabling of the advanced programming level.
N.B. It is possible to enable the advanced programming level only if you have the
corresponding license.
z
Automatic wiring : Enabling or disabling of the automatic wiring function.
N.B. All the other items of the programming options menu are disabled.
z
Zones: Association of the logical zones to the physical zones - Alphanumeric
description - Enabling and programming of voice message using the vocabulary -
Zone type - Alarm cycles - Contact type - Configuration of the detector - Zone filter
and sensitivity
z
Zones-Functions: Association of the functions: siren, PGM, by-pass, coinciding
zone, chime, non excludable zone, common zone
z
Zones-Programs: Association of the zones to the programs - Alphanumeric
description - Enabling and programming of the voice message using the vocablary
z
Consoles: Association of the LED to the programs - Enabling of quick arming/
disarming, panic alarm, quick menu, chime - Audio settings - Message scheduling
z
Keypoints: Association of RFID/transponder readers and biometric readers to the
programs
z
Options: Functioning of Buzzer, wireless section - Voice report - Key zone
functioning - Enabling of single arming mode - Enabling/disabling tamper -
Antimasking control - Association of the siren/outputs
z
Outputs: Programming of polarity
z
Bus sirens: Association of the sirens to the programs - After blinking - Volume
setting - Siren mode - Sound type - Functioning mode - Enabling/disabling of the
antifoam and antidrilling protection
PROGRAMMING OPTIONS
ZONE CONFIGURATION
1. INTRODUCTION
PROGRAMMING OPTIONS