Tecnoalarm TP8-96 Installer Manual Download Page 24

Page: 24 / 118

Zone configuration

Installer Manual -

TP8-96 VIDEO

2-6

PROGRAMMING OF A WIRELESS DEVICE

Wireless detector.

The first part of programming is identical to any other category of detectors.

Select the

Wireless exp.

and a

wireless

loop wiring among the options available.

DETECTOR

Permits association and configuration of the detector or contact by clicking on the correspondent item:

Technology
Select the technology among: PIR, contact, inertia, pulse count and barrier

Type
Select the type among the devices listed for each technology

CONFIGURATION

Disabling of supervision
Enabling/disabling of the supervision signaling control.
Check the item to enable the function.

Tamper disabling
Enabling/disabling of the tamper function.
Check the item to enable the function.

Repeat the procedure for every zone to be configured, then press:

to confirm and quit

Abandon

to quit without saving

Summary of Contents for TP8-96























































































































Search results

Summary of Contents for TP8-96

Reviews:

Tecnoalarm TP8-96, Installer Manual, Page: 24 / 118

Search results

Summary of Contents for TP8-96

Reviews: