6. SYSTEM MODE
EO18-33011
6.6 PRINTER PARAMETER FINE ADJUSTMENT
6-33
6.6.6 Ribbon Motor Voltage Fine Adjustment (Feed/Rewind Motor)
With this parameter you can fine adjust the Ribbon Motor Voltage (Torque). When “<3>ADJUST
SET” appears, press the [PAUSE] key 7 times to enter the Ribbon Motor Voltage Fine
Adjustment (Rewind Motor) menu.
To change the screen to the Ribbon Motor Voltage Fine Adjustment (Feed Motor), press the
[PAUSE] key again.
[FEED] key:
Pressing the [FEED] key one time causes a –1 step change, up to –15 steps.
[RESTAT] key:
Pressing the [RESTART] key one time causes a +1 step change, up to +0 step.
After completing the fine adjustment, press the [PAUSE] key.
NOTES:
1. The fine adjustment value equals to the sum of the fine adjustment values set by
the PC command and this parameter. The maximum ribbon motor voltage fine
adjustment value is
−
15. When the value reached the maximum, the value
remains unchanged even if the subsequent fine adjustment is performed. Only for
the Feed motor, the voltage can be increased up to 50%.
2. One step corresponds to 5% of the standard voltage and up to 75% of the voltage
can be decreased.
3. Please make this adjustment if a ribbon error occurs though the ribbon is proper.
RBN ADJ<BK> +0
[RESTART]
[FEED]
RBN ADJ<FW> +0
RBN ADJ<FW> -1
RBN ADJ<FW> -2
RBN ADJ<FW> -14
RBN ADJ<FW> -15
RBN ADJ<FW> +0
RBN ADJ<BK> +0
RBN ADJ<BK> -1
RBN ADJ<BK> -2
RBN ADJ<BK> -14
RBN ADJ<BK> -15
Rewind Motor
Feed Motor
Rewind Motor
Feed Motor