7. ON LINE MODE
EO18-33011
7.1 THRESHOLD SETTING
7- 1
7. ON LINE MODE
In the ON LINE mode, the following settings can be performed.
•
Threshold Setting for the Feed Gap Sensor
•
Threshold Setting for the Black Mark Sensor
Threshold Setting for the Feed Gap/Black Mark Sensor
7.1 THRESHOLD SETTING
To maintain a constant print position the printer uses the Transmissive Sensor to detect the gap
between labels by measuring the amount of light passing through the media. When the media is pre-
printed, the darker (or more dense) inks can interfere with this process causing paper jam errors. To
get around this problem a minimum threshold can be set for the sensor in the following way.
Threshold setting procedure
(1)
Turn the power ON. The printer is in stand by mode.
(2)
Load a media roll.
(3)
Press the [PAUSE] key.
(4)
The printer enters the pause mode.
(5)
Press and hold the [PAUSE] key for at least 3 seconds in the pause state.
(6)
The sensor type is displayed.
(7)
Select the sensor type with the [FEED] key.
Press and hold the [PAUSE] key for 3 seconds or longer.
[FEED] key
Threshold setting for the Feed
Gap Sensor
Threshold setting for the Black
Mark Sensor
21 /,1(
75$160,66,9(
5()/(&7,9(
3$86(
[PAUSE] key
3$86(
21 /,1(
75$160,66,9(
5()/(&7,9(
75$160,66,9(
[FEED] key
Black Mark Sensor
Feed Gap Sensor
