8. PRINTER OPERATION
EO18-33011
8.2 Installing the Printer Drivers
8- 2
8.2.1 System Requirements
1. System
a. IBM Compatible PC running Windows 95® or Windows 98® or Windows NT® Version 4.0
Workstation, Windows NT® Version 4.0 Server, Windows 2000® Professional, or Windows
2000® Server.
b. Pentium® processor, 133MHz or greater recommended.
c. Installed memory of 16MB minimum (32MB recommended).
d. Available Hard Disk space of 10MB or more.
2. Interface
a. The RS-232C interface
b. Centronics interface
NOTE: Windows 3.1® is not supported.
Windows 3.1®, Windows 95®, Windows 98®, Windows NT®
,
and Windows 2000 ®
are
registered trademarks of Microsoft Corporation.
Pentium® is a registered trade-mark of Intel Corporation
8.2.2 Driver Installation
NOTES: 1. How to install the printer driver from the supplied CD-ROM is described below.
2. When the printer driver is downloaded from TOSHIBA TEC Web Site, type in
“C:\TEC\MONO\CD\SETUP.EXE”. C:\TEC\MONO\CD is the default install directory
generated when the printer driver file (Bdrv_Vx_x_Buildxx.exe) is run.
1. Insert the supplied CD-ROM into the CD drive of your PC.
2. Click on the START button, then select and click on the Run….
3. Type in ‘D:\DRIVER\SETUP.EXE” and click on the OK button.
(“D” may be replaced with your CD drive’s letter.)
4. The screen will change as shown below.
