6. SYSTEM MODE
EO18-33011
6.7 TEST PRINT
6-37
Print Speed Setting
Select the print speed for the test print between 4 inches/second and 2 inches/second.
After selecting the print speed, press the [PAUSE] key to go to Sensor Type Selection.
Sensor Type Selection
Select the sensor type among “TRANS” (Feed Gap Sensor), “REFLECT” (Black Mark Sensor)
and “NONE”.
After selecting the sensor type, press the [PAUSE] key to go to Ribbon Type Selection.
NOTE:
Select the sensor type which is proper to the media being used. Basically, the
Reflective Sensor (Black Mark Sensor) is for tag paper, and the Transmissive Sensor
(Feed Gap Sensor) is for label.
Ribbon Type Selection
Select the ribbon type for the test print from “NO RIBBON”, “TRANS” or “NO TRANS”.
After selecting the printing mode, press the [PAUSE] key to go to Issue Mode Selection.
NOTE:
Select the ribbon type which is proper to the operating conditions. Basically, the
Thermal Transfer is for the use of ribbon, and the Thermal Direct is for the use of
thermal paper.
PRINT SPEED 8”/s
PRINT SPEED 5”/s
PRINT SPEED 4”/s
SENSOR NONE
SENSOR REFLECT.
[RESTART]
[FEED]
SENSOR TRANS.
None
Black Mark Sensor
SENSOR TRANS.
Feed Gap Sensor
RIBBON NO RIBBON
RIBBON TRANS.
[RESTART]
[FEED]
RIBBON TRANS.
No ribbon
Transmissive ribbon
[RESTART]
[FEED]
PRINT SPEED 10”/s
PRINT SPEED 4”/s
RIBBON NO TRANS.
Non transmissive ribbon
