6. SYSTEM MODE
EO18-33011
(Revision Date: Mar. 30, 2004)
6.12 BASIC SETTING
6-53
6.12 BASIC SETTING
!
Outline of Basic Setting
The Basic function enables the B-492 printer to operate with the program created for other printers, by
converting it to Basic program and downloading this Basic program to the B-492 printer. Setting the
downloaded Basic program to be enabled/disabled, browsing the program file, data file, and area file,
etc. are available in this mode.
The Basic Setting menu contains the following.
While pressing the [FEED] and [PAUSE] keys at the same time, turn on the printer. Hold both keys
until the “<1>DIAG. Vx.x” Message appears.
Press the [FEED] key 8 times.
The printer is at the start of the BASIC setting menu.
When “<9>BASIC” appears, press the [PAUSE] key.
6.12.1 Basic Specification Selection Mode
Select whether the Basic specification is enable or not.
BASIC ENABLE
<1>DIAG. Vx.x
<9>BASIC
BASIC Specification Selection Mode
BASIC File Browser
BASIC Trace Selection Mode
[PAUSE]
FILE MAINTENANCE
TRACE SETTING
<9>BASIC
[RESTART]
[FEED]
BASIC ENABLE
[PAUSE]
BASIC OFF
BASIC ON
FILE MAINTENANCE
[PAUSE]
[RESTART] [FEED]
“BASIC ON” or “BASIC OFF” is selected each time the [RESTART] or
[FEED] key is pressed.
Basic specification selection is completed by pressing the [PAUSE] key.
[RESTART]
[FEED]
[RESTART]
[FEED]
