6. SYSTEM MODE
EO18-33011
6.8 SENSOR ADJUSTMENT
6-45
6.8.3 Feed Gap Sensor Adjustment
Follow the Feed Gap Sensor adjustment procedure below.
(1)
Place the backing paper (labels are removed) in the B-492 printer so that the Feed gap
Sensor detects it.
(2)
Press and hold the [RESTART] or [FEED] key for more than 3 seconds.
(3)
Press the [PAUSE] key to show the current Black Mark Sensor status with no paper.
6.8.4 Black Mark Sensor Adjustment (No Paper)
Follow the Black Mark Sensor (no paper) adjustment procedure below.
(1)
Remove any paper from the detecting area of the Black Mark Sensor
(2)
Press and hold the [RESTART] or [FEED] key for more than 3 seconds.
(3) Press the [PAUSE] key to show the current Feed Gap Sensor status with no paper.
6.8.5 Feed Gap Sensor Adjustment (No Paper)
Follow the Feed Gap Sensor (no paper) adjustment procedure below.
(1)
Remove any paper from the detecting area of the Feed Gap Sensor.
(2)
Press and hold the [RESTART] or [FEED] key for more than 3 seconds.
(3)
Press the [PAUSE] key to return to “<5>SENSOR ADJ.” display.
[TRANS.] 2.3V
Status detected by the Feed Gap Sensor
0.0V to 5.0V
[TRANS.] 4.1V*
When the adjustment is completed, “*” appears.
[PE LV.R] 4.3V
Status detected by the Black Mark Sensor (No paper)
0.0V to 5.0V
[PE LV.R] 4.3V*
When the adjustment is completed, “*” appears.
[PE LV.T] 4.8V
Status detected by the Feed Gap Sensor (no paper)
0.0V to 5.0V
[PE LV.T] 4.8V*
When the adjustment is completed, “*” appears.
