2. MAJOR UNIT REPLACEMENT
EO18-33011
2.3 REPLACING THE SOLENOID
2- 4
5) Replace the solenoid and attach it to the solenoid attachment plate.
6) Assemble the solenoid unit so that the head up link engages the spring pin.
7) Temporarily secure the solenoid ass’y with the two SMW-4x8 screws.
8) Turn the head lever to close the print head.
9) Install the solenoid ass’y adjusting the print head position in the following procedure.
Fig. 2-6
Solenoid
Spring Pin
Head Up Link
!',$*
9
+($' 83 $'-867
62/(12,' 21«
!)25 )$&725<
[RESTART] key
[PAUSE] key
[PAUSE] key
!)25 )$&725<
Turn the power ON while pressing and holding the [FEED] and [PAUSE] keys.
About 10 seconds the solenoid turns on and the
print head becomes open state. During this time
make the following adjustment.
About 10 seconds later, the solenoid
turns off and the display changes to
“<8>FOR FACTORY”
