6. SYSTEM MODE
EO18-33011
6.5 PARAMETER SETTING
6-21
After setting the control code for Control Code 1, press the [PAUSE] key to show the CONTROL
CODE2 screen. In a same manner, press the [PAUSE] key after setting the control code for
Control Code 2 to display the CONTROL CODE3 screen.
Press the [PAUSE] key after setting the control code for Control Code 3, and the FEED Key
Function Selection screen will appear.
6.5.10 Ribbon Type Selection
With this parameter you can select a Ribbon type. When “<2>PARAMETER SET” appears,
press the [PAUSE] key 10 times.
NOTE: Transmissive ribbon … The ribbon end sensor considers transmissive part as “Ribbon”
and non transmissive part as “Ribbon end”.
Non transmissive ribbon … The ribbon end sensor considers non transmissive part as
“Ribbon” and transmissive part as “Ribbon end”.
After selecting the ribbon type, press the
[PAUSE]
key.
6.5.11 FEED Key Function Selection
With this parameter you can select the function of the [FEED] key.
When “<2>PARAMETER SET” appears, press the [PAUSE] key 11 times.
NOTE: When “FEED” is selected, the [FEED] key will feed one media when pressed. When
“PRINT” is selected, the [FEED] key will print the data in the Image Buffer (The last
printed data).
After selecting the FEED key function, press the [PAUSE] key.
&21752/ &2'(
&21752/ &2'(
&21752/ &2'(
[PAUSE]
[PAUSE]
)((' .(<
)(('
)((' .(<
35,17
)((' .(<
)(('
[RESTART]
[FEED]
Transmissive ribbon
Non transmissive ribbon
[RESTART]
[FEED]
5,%%21 75$16
5,%%21 121 75$16
5,%%21 75$16
