Tandberg Data Storage Library T128, User Manual

Page: 63 / 192

Tandberg StorageLibrary T128 User’s Guide 51
Enabling SSL
SSL increases data protection so that data from the library can be sent over the internet securely.
Administrative users can enable or disable SSL settings. The default SSL setting is
Disabled . Enabling SSL
also enables SSL-based secure authentication for SMI-S. SMI-S is the newest standard of SNMP, which
makes sets of data continuously available. SMI-S is always enabled by default.
You cannot enable the SSL settings from the web client. The path to open the appropriate screen is as
follows:
• From the operator panel, select Setup > Network Mgmt .
Setting Trap Registration
The library ignores all SNMP SET operations, so external management applications cannot register
themselves to receive SNMP traps from the library. Administrative users can use the
Trap Registration tab
on the operator panel Network Management screen to manually register the IP addresses of external
applications to enable them to receive SNMP traps from the library.
The Trap Registration screen lists existing IP addresses and the corresponding port numbers. The
following options are available:
• Create IP address
• An empty IP address field appears at the top of the list.
• Default Port number is 162.
• If no IP address is selected, the Modify and Delete buttons are grayed out.
• Modify IP address
• If an IP address is selected, the Create button is grayed out.
• Delete IP address
• If an IP address is selected, the Create button is grayed out.
Note
Selecting Apply on any one of the Network Management tabs ( SSL , Trap
Registration , and SNMP Version ) applies the settings on all three tabs. The
HTTP service restarts when you select Apply . All logged-in users have to
reconnect after HTTP services have been restarted.
Note
Selecting Apply on any one of the Network Management tabs ( SSL , Trap
Registration , and SNMP Version ) applies the settings on all three tabs. The
HTTP service restarts when you select Apply . All logged-in users have to
reconnect after HTTP services have been restarted.
Note
Before enabling SSL settings, make sure you enter a name for the library in the
Library Name text box on the Network Configuration operator panel screen.
After enabling SSL settings, use that library name to access the library. If you
do not use that name, you will receive a security alert. In addition, make sure to
complete all the text boxes listed on the web client
Contact Information
screen ( Setup > Notification > Contact Information ) before enabling SSL
settings. This information is used to identify company information in the SSL
certificate.