Tandberg Data Storage Library T128, User Manual

Page: 104 / 192

92 Installing, Removing, and Replacing
a. If you plan to stack the 5U control module at the top of the library, remove the control module’s
bottom cover plate and the 9U expansion module’s top plate.
b. If you plan to stack the 5U control module at the bottom of the library, remove the control
module’s top cover plate and the 9U expansion module’s bottom plate.
* Recommended location for adding an expansion module.
Installing the 9U Expansion Module
1 Open the 9U expansion module’s access door and raise the guide pin by pulling it up and turning it
slightly as if it were a screw. Otherwise, the guide pin may scratch the front doors of the module on which
you are stacking.
Table 8 Cover Plate Location
5U 14U
cover plate
cover plate 5U Control
Module
5U Control
Module NEW 9U
Expansion
Module*
cover plate cover plate