Tandberg Data Storage Library T128, User Manual

Page: 119 / 192

Tandberg StorageLibrary T128 User’s Guide 107
Removing 9U Expansion Modules From an Existing Library
These instructions explain how to permanently remove a 9U expansion module from the library.
There are some configuration settings to take into account when removing a 9U expansion module from an
existing library.
• COD licenses remain the same. After the 9U expansion module is removed, there may be more
slots licensed than are available. Only the available slots appear on the
License screen.
• All resources in the removed module(s) are removed. A partition with all resources in the removed
module(s) will be present with no slots or drives. This partition can only be deleted.
The best practice before removing a 9U expansion module is to:
• Delete all partitions.
• Delete all cleaning slots.
• Set the number of I/E station slots to six.
Preparing to Permanently Remove the 9U Expansion Module
Required tools:
• Phillips #2 screwdriver, for removing and replacing the top cover plate
• T10 TORX screwdriver, for removing and replacing the bottom cover plate
You need to unstack the 14U library to remove the 9U expansion module.
1 Remove all tape cartridges from the library using the import and export commands of the operator panel
or web client.
2 Reconfigure the library with the following settings:
• Partitions: 0
• Cleaning slots: 0
WARNING
ALL LIBRARIES MAY BE INSTALLED IN A RACK HAVING A MAIN
PROTECTIVE EARTHING (GROUNDING) TERMINAL, AND POWER
MUST BE SUPPLIED VIA AN INDUSTRIAL PLUG AND
SOCKET-OUTLET AND/OR AN APPLIANCE COUPLER COMPLYING
WITH IEC 60309 (OR AN EQUIVALENT NATIONAL STANDARD) AND
HAVING A PROTECTIVE EARTH (GROUND) CONDUCTOR WITH A
CROSS SECTIONAL AREA OF AT LEAST 1.5 MM
2
(14 AWG).
TO ENSURE PROPER AIRFLOW AND ACCESS SPACE, ALLOW 60 CM
(24 INCHES) IN THE FRONT AND BACK OF THE LIBRARY.
WARNING
WITHOUT TAPE DRIVES, TAPE CARTRIDGES, OR POWER
SUPPLIES, A 5U WEIGHS APPROXIMATELY 58 LBS. A 9U , WITHOUT
TAPE DRIVES, TAPE CARTRIDGES, OR POWER SUPPLIES,
EXCEEDS 65 LBS.
TO AVOID SERIOUS INJURY, AT LEAST TWO PEOPLE ARE
REQUIRED TO SAFELY LIFT THE MODULES INTO POSITION.