![Tandberg Data Storage Library T128 User Manual Download Page 117](http://html1.mh-extra.com/html/tandberg-data/storage-library-t128/storage-library-t128_user-manual_3527366117.webp)
Tandberg StorageLibrary T128 User’s Guide
105
of the Y-rail release mechanism, lift it out of its locked position, and slide it downward as far as
it will go.
Doing this aligns the Y-rails with the Y-rails of the module beneath it.
9
Repeat these steps for each module you need to re-install in the library configuration.
Preparing to Use the Library
1
Add the tape drives to the modules. For details, see
Adding, Removing, and Replacing Tape Drives
on
page 148.
2
Add the power supplies. For details, see
Adding, Removing, and Replacing Power Supplies
on page
136.
3
Add the LCB to the control module. For details, see
Removing and Replacing the Library Control Blade
and LCB Compact Flash Card
on page 133.
4
Unpark the robot assembly.
a. Gently raise the robot assembly so that it no longer rests on the parking tab.
b. With your free hand, swivel the parking tab away from you until it is removed completely from
the interior of the module. When replaced correctly, the parking tab will not accidentally swivel
into the path of the robot.
CAUTION
Check to make sure that there is no gap between the top and bottom
Y-rails on both the front and back of the library. If a gap exists, the
library cannot mechanically initialize.
CAUTION
Support the robot assembly by holding onto the broad metal X-axis
plate. Lifting the robot by the thin metal rod will bend the rod.
Summary of Contents for Storage Library T128
