Tadano ATF 130G-5, Translation Of The Original Operating Manual

Page: 442 / 636

Table 1:
Resetting telescope man‐
ually
Rocker switch 3
(S925)
Manual tele‐
scope actuation
Rocker switch 4
(S909)
Pre-selecting
the telescope/
cylinder
Rocker tip
switch 7
(S910)
Release the
lock
Left crane con‐
trol lever (JS)
off
on with locking
handle
on (C) cylinder off
off
Tele off
Tele on
From
the
central
posi‐
tion
on (B) tele‐
scope
1. Activate manual control
Prerequisite: Tele (B-pin)
locked and cyl. (C-pin)
locked in a tele
(see reading in Tab. 2).
Locking handle
downwards,
"On" position,
Light active
off off neutral
2. Telescope (B)-pins un‐
locked
and simultaneously move
"Tele off" using the JS until
B-pins are completely un‐
locked (see reading in Tab.
2).
on (B) off Tele off
3. After unlocking the B-
pins,
keep the B-pins unlocked
on (B) off neutral
4. Retract the telescope
completely to 0% using the
JS (see reading in Tab. 3).
on (B) off Tele on
5.Lock B-pins (see reading
in Tab. 2).
off off neutral
6. Unlock cylinder C-pins
completely (see reading in
Tab. 2).
on (C) off neutral
7. After unlocking the C-
pins, keep the C-pins un‐
locked.
on (C) off neutral
8. Extend the cylinder up to
the next telescope using
the JS (follow the telescope
ID and the locking position,
see reading in Table 3).
on (C) off Tele off
9. Lock C-pins (see reading
in Tab. 2). If required, use
"Tele off"/"Tele on" to move
the cylinder carefully until it
is completely locked.
off off Tele off/Tele on
3 Operation
442
ATF 130G-5 2146097
2014-09