WARNING
Tipping of the mobile crane due to unstable support!
In case of an unstable ground, there is a risk of tipping and thus a risk of
accidents.
1. Only use stable materials to support the crane, such as adequate
wooden planks.
2. The support must be situated centrally underneath the support
plates so that the distribution of pressure is equal.
The minimum support surface required may be calculated from the supporting force of the mobile
crane (see supporting force table) divided by the permissible load bearing capability of the ground.
necessary support surface =
supporting force
permissible load bearing capability of ground
On no account may the supporting surface be smaller than the required surface calculated.
If the load bearing capability of the ground is unknown, its strength must be determined with appro‐
priate tests, for example with a penetrometer.
Permissible ground pressure (extract from DIN 1054)
Type of ground
daN/cm
2
Backfilled ground, not artificially compressed:
0-1
Natural, obviously untouched ground:
Mud, peat, moor earth
Fine to medium sand
Coarse sand to gravel
0
1.5
2.0
Cohesive soils:
mushy
soft
firm
semi-solid
hard
0
0.4
1.0
2.0
4.0
Rock with minimal jointing in good, unweathered condition and favourable stratifica‐
tion:
in closed sequence of strata
in bulky and columnar formation
15
30
Artificially compressed ground:
Asphalt
Concrete B I
Concrete B II
5 - 15
50 - 250
350 - 550
Slopes and depressions
When choosing the site to position the mobile crane, it must be ensured that the mobile crane does
not stand too close to ditches, slopes or trenches.
2 General safety instructions
ATF 130G-5 2146097
2014-09
19
Summary of Contents for ATF 130G-5
