Tadano ATF 130G-5, Translation Of The Original Operating Manual

Page: 569 / 636

Crane cab
7-8
ATF130G-5
2010-12
0300_EN_FA046_7_08_00_00_FA029.DOC
3/4
8.5 TADANO-Cockpit-Graphic-Control System
DANGER
Personal injuries due to improper repairs!
Only qualified personnel may carry out the repairs. For replacing parts or
components, use only those parts that have been specified in the spare parts list.
Unauthorised opening and improper repairs may lead to death or severe physical
injuries as well as considerable material damage.
8.5.1 Monitor
The monitor of the TADANO-Cockpit-Graphi7-Control System should be cleaned regularly with a lint-free
cloth depending on the dust accumulation.
8.6 Clean the circulating air filter
The circulating air filter (3) for the blower and air condition is located below the grid (2) in the floor assembly
(1) behind the seat.
The circulating air filter (3) must be cleaned if it is visibly soiled with large dust particles.
The necessary cleaning intervals largely depend on the use of the crane.
The dirty element can be washed out with water and re-fit after drying.
The element must be checked for damage before fitting.
- Take of the grid (2) and remove the element (3).
- The cleaned and dried element is fit in the
corresponding reverse order.