Tadano ATF 130G-5, Translation Of The Original Operating Manual

Page: 117 / 636

3.5.5 Safety working range
If the working range in the automatic safe load indicator is restricted and if the crane reaches the
limiting range, the automatic safe load indicator stops the crane automatically.
The following working ranges can be restricted in the automatic safe load indicator:
▪ Boom height
▪ Upper limit of the boom angle
▪ Lower limit of the boom angle
▪ Working radius
▪ Left slew
▪ Right slew
When the "Automatic safe load indicator override" key-operated switch
is activated, the safety working range is deactivated.
When the Slow-Stop function is deactivated (switch on the instrument
panel outside the automatic safe load indicator), the slew range limit is
deactivated.
When the slewing gear brake is not applied, the slewing movement
sometimes does not stop immediately (owing to the flywheel of the su‐
perstructure).
The stored values for the safety working range are retained even after
deactivating the automatic safe load indicator.
Selection, saving and deactivation
In the normal state of the ASLI display, press <Safety working range> to switch to the mode for
entering the safety working range.
When you press the keys <Safety working range> or <Forward>, the selectable limits in the auto‐
matic safe load indicator will change cyclically in the sequence described below. If you press
<Back>, they will be selected in the reverse order.
Boom height → upper boom angle → lower boom angle → working radius → left slew → right slew →
boom height → ....
When selecting the limit, the currently selected limit flashes on the numerical display, whereas oth‐
er (non-selected limits) light up constantly. When you press the <Set> key, the current crane posi‐
tion will be entered as the desired limiting value in the ASLI and the mode for the safety working
range will be exited. When you press <Set> again in the mode for entering the limit, the active limit‐
ing value will be deleted.
Press on <Exit> to exit the ASLI mode for entering the safety working range.
3 Operation
ATF 130G-5 2146097
2014-09
117