Tadano ATF 130G-5, Translation Of The Original Operating Manual

Page: 593 / 636

Excess pressure valve with micro switch on the pump
element and grease level controller, built into electronic
pump EP-1:
View of the integrated electronic controller BEKA-troniX1
from below:
The integrated electronic controller BEKA-troniX1 can be
supplied with two additional functions:
- System excess pressure monitoring
- Grease level monitoring
The additional equipment can be attached to the BEKA-
troniX1 controller with any selected program.
In case of a version with additional functions, besides the
bayonet connector, two additional four-pole plug-and-
socket connectors are located in the lower part of the motor
casing.
These additional functions cannot be enabled
subsequently in case controllers have been supplied
without the as the plug-and-socket connectors at the lower
part of the motor casing are missing.
The additional plug-and-socket connectors and the cables
of the corresponding switches are marked by colors.
The plug-and-socket connector with the green ring serves
to connect the system pressure monitoring system. The
plug-and-socket connector with the red ring serves to
connect the grease level monitoring system.
Plug-and-socket connectors which are not connected must
be closed using a cover.
The additional functions to the controller can be specified in
the order.
Cover to close an unused plug-and-socket connector for
the supplementary functions of the integrated electronic
controller BEKA-troniX1:
Order-no.: 1000913004
BEKA-troniX1
Additional equipment
Plug-and-socket
connectors for
additional functions
5
green
marking ring
red marking ring
© BEKA
2012 All rights reserved!
Subject to alterations!