Tadano ATF 130G-5, Translation Of The Original Operating Manual

Page: 98 / 636

No. Icon Function key Description
0 <Tare> You can use this key to activate or deactivate the "Tare" function.
When you keep the key pressed, the Tare function will be activated
and the displayed load value will be reset to zero. Naturally, the ac‐
tual load values are also calculated for the automatic safe load indi‐
cator.
If you press the key again, the Tare function will be deactivated.
1 <Rope falls> You can use this key to select the number of rope falls.
2 <Plus> You can use this key to increment a numeric value.
3 <Counter‐
weight>
You can use this key to select the state of the counterweight.
4 <Setup mode> You can use this key to select the setup mode of the automatic safe
load indicator.
5 <Checking> You can use this key to start the test function of the automatic safe
load indicator or display the Special functions menu.
When you keep this key pressed, the test function of the automatic
safe load indicator will start. All LEDs and LCD segments will light
up. Moreover, the alarm signal is sounded and the load moment of
extending movements is blocked. You can deactivate the test func‐
tion of the automatic safe load indicator by pressing the <Exit> key.
If you keep the key pressed for longer than 3 seconds, the Special
functions menu will appear. You can exit this menu by pressing the
<Exit> key.
6 <Buzzer off> You can use this key to deactivate the alarm signal temporarily.
7 <Minus> You can use this key to decrement a numeric value.
8 <Working
range limit>
You can use this key to call the "Working range limit" function.
9 <Left outrig‐
ger>
You can use this key to select the state of the left outrigger.
10 <Work mode> You can use this key to toggle between the boom and luffing fly jib
operation.
11 <Back> You can use this key to select a menu. When you use this key for
selecting a menu, the menu cursor jumps upwards or to the left.
12 <Exit> You can use this key to end or deactivate the current state or the
current function. When you press this key, the automatic safe load
indicator changes to the original (basic) display mode.
13 <Right outrig‐
ger>
You can use this key to select the state of the right outrigger.
14 <Forward> You can use this key to select a menu. When you use this key for
selecting a menu, the menu cursor jumps downwards or to the right.
15 <Set> You can use this key to set the selected state.
In the following descriptions, function keys are always indicated with
"<…>".
3 Operation
98
ATF 130G-5 2146097
2014-09