Finishing work
1. Mount the anti-twoblock device,
anemometer [page 160] and aircraft warning lamp [page
162]*) on the head of the jib.
2. Guide the hoisting rope through the release weight of the anti-twoblock device.
3. Enter the setup condition in the automatic safe load indicator.
Installing of the intermediate sections
X Distance from the rotation centre up to the jib head = 42.0 m (137.8 ft)
X0 Distance from the rotation centre up to the 1st intermediate section = 14.5 m (47.6 ft)
X1 Length of an intermediate section = 7.0 m (23.0 ft)
Intermediate sections are mounted between the 3.8-m-stinger (12.5 ft) and the 6.0-m-stinger foot
(19.7 ft). NOTICE! A maximum of two intermediate sections can be mounted.
Prerequisite:
➢ There should be no obstacles in the movement range.
➢ The mobile crane is supported as prescribed.
➢ The slewing gear brake is engaged.
➢ All telescopes are retracted.
➢ The superstructure is slewed to the back.
➢ The telescopic boom is lowered.
➢ The stinger (3-piece) is mounted at the working position on the telescopic boom.
➢ The setup mode in the automatic safe load indicator is activated.
➢ The bottom block was placed on the ground and decoupled. The release weight of the anti-two‐
block device was removed from the hoisting rope.
➢ Wind up the hoisting rope under tension until the rope end can be placed in front of the sheave
on the 3.8-m-fly jib (12.5 ft). NOTICE! Do not drag the hoisting rope on the ground.
1. Lower the mobile crane using the rear outriggers.
Separating the 6.0 m (19.7 ft) stinger foot with the boom end from the 3.8 m (12.5 ft) stinger foot
The 6.0-m-stinger foot (19.7 ft) remains pinned with the boom end.
1. Disconnect the electrical connection for the anti-twoblock device and the aircraft warning
lamp*) between the 3.8-m-stinger (12.5 ft) and the 6.0-m-stinger foot (19.7 ft).
2. Lower the telescopic boom completely and unwind the hoisting rope until the boom end slightly
above the ground.
3. Luff up the fly jib.
3 Operation
364
ATF 130G-5 2146097
2014-09
Summary of Contents for ATF 130G-5
