Tadano ATF 130G-5, Translation Of The Original Operating Manual

Page: 113 / 636

A marking will appear at the currently saved boom
position.
*1 12.8 m ↓
2 17.1 m ↓
3 21.4 m ↓
…
Only two rows are shown.
You can use the <Forward> and <Back> keys to
scroll through the displayed positions in order to
select another position.
…
28 17.1 m ↓
29 21.4 m ↓
…
1. After selecting, press <Set>. The selected boom target will then be saved and the graphics for
the boom control will appear on the graphical screen.
If you actuate the telescope control lever before pressing the <Set> key, the graphics for the
boom control will appear. Press <Exit> to display the telescopic boom selection table.
Example:
1 Target position of the boom 5 Length of the telescope cylinder
2 Current boom position 6 Target position of the boom (graphical)
3 Graphical status display of the boom lock
(B-pin):
Green: locked
Non-filled circle: unlocked
Red: Sensor error
Yellow: locking or unlocking process is
running
7 Instructions or error messages are dis‐
played here:
Note: extend
Note: retract
4 Graphical status display of the cylinder
lock (C-pin):
Oblong green rectangle: locked
Non-filled rectangle: unlocked
Red: Sensor error
Yellow: locking or unlocking process is
running
3 Operation
ATF 130G-5 2146097
2014-09
113