Tadano ATF 130G-5, Translation Of The Original Operating Manual

Page: 583 / 636

Grease Overview (Grease Recommendations)
7-16
ATF130G-5
2010-12
0315_EN_FA046_7_16_00_00_FA029.DOC
1/2
16 Grease Overview (Grease Recommendations)
Maintenance point Grease Grade Capacity
Gear ring pinion
and
gear teeth of the Lubrication preserving agent specification BB If
ball-bearing slewing
ring (DIN 51513) or gear ring bitumen spray necessary
Swing mechanism
lock pins
Grease nipple
on:
bottom blocks,
guide rollers on
telescopic booms
Lithium-saponified grease,
as per DIN 51825-KP2K-20
If
necessary
Hoisting rope Slushing oil or corrosion protection, grease lubrication or
adhesive lubricant or gear wheel spray
Lubricity of -25 °C to +120 °C
Dropping point 200 °C DIN 51801, consistency class 2 DIN
51818
If
necessary
Telescope- sliding
pieces, slide
coverings, Long-term lubricant. We recommend: FAUN-LUB
sliding rails, horn
cheeks,
guide rollers From -40 °C to +125 °C
NLGI No. 1
Penetration 310/340
Dropping point +180 °C
From -30 °C to +150 °C
NLGI No. 2
Penetration 265/295
Dropping point +185 °C
If
necessary
Telescopic boom
Lift cylinder and
boom locking
Lithium-saponified grease; dropping point above 170 °C
Penetration 2 (as per DIN 51804 or ASTM-D 217)
to -20 °C
KPL grease 2N (DIN 51502/825)
(-20 °C to +140 °C )
to -40 °C
KTPL grease 2M (DIN 51502/825)
(-40 °C to +120 °C )
If necessary
Central lubricating
system
Grease container
Lithium-saponified grease,
as per DIN 51825-KP2K-20
If
necessary
Batteries Battery grease If
necessary
Door locks Graphite powder If
necessary
Other lubricating
points Lithium-saponified grease,
as per DIN 51825-KP2K-20
If
necessary